StarTech.com 2x M.2 NGFF SSD RAID Controller Card
Price: $9499
ADD TO CART
StarTech.com 2x M.2 NGFF SSD RAID Controller Card
  1. ADD TO CART
  2. Save to wishlist

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Storage controller (RAID) - M.2 - M.2 Card / SATA 6Gb/s - 6 GBps - RAID 0, 1, 10, JBOD - PCIe 2.0 x2

Item#:  YYS2-5608765  | Model#: PEXM2SAT3422
Price:
$94.99
Shipping:
Currently out of Stock (Details)

StarTech.com 2x M.2 NGFF SSD RAID Controller Card Product Details

Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express. This M.2 SSD RAID controller card lets you install two M.2 NGFF (Next Generation Form Factor) drives in your desktop computer. The card also features two SATA III (6Gbps) ports and supports hardware RAID. Now, you can merge the speed and compact size of M.2 solid state drives (SSD) with the storage capacity of traditional hard disk drives (HDD).

This M.2 controller card lets you take advantage of the size and performance benefits of NGFF SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so you can install them in small form-factor PCs and servers, or in tighter areas within your computer case.

When you couple the card with an M.2 drive, you can give your computer's performance a noticeable speed boost. By installing your operating system on the M.2 drive, you'll have faster access to the files you commonly use, and you can continue to use your higher-capacity platter HDD for bulk storage.

Due to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has failed but its M.2 drive is functional, then this card can help with data recovery. Once the M.2 drive is installed and the data recovery is complete, you can continue to use the drive for storage and backup purposes.

If you need a scalable, internal storage solution that you can count on, then this card can help. It supports a range of RAID configurations (RAID 0, 1, and 10), giving you multiple ways to expand your storage, improve your computer's performance, or to create data redundancy backups.

Because the M.2 card supports port multiplication, you can connect up to four drives to one of the card's SATA ports. With a built-in port multiplier, you can install up to seven drives (two M.2 SSDs, five SATA drives) in your computer through this single drive controller.

You can rest assured that your M.2 SATA drives are compatible with the card. It supports the most common drive sizes, including 22110, 2280, 2260, 2242 and 2230. For more versatility, the card also supports hybrid drives.

Specifications

General
   Device Type:  Storage controller (RAID) - plug-in card
   Hard Drive Form Factor Compatibility:  M.2
   Host Bus:  PCIe 2.0 x2

Storage Controller
   Interface:  M.2 Card / SATA 6Gb/s
   Data Transfer Rate:  6 Gbit/s
   Supported Devices:  Disk array (RAID)
   RAID Level:  RAID 0, RAID 1, RAID 10, JBOD
   Processor:  Marvell 88SE9230

Expansion / Connectivity
   Interfaces:  2 x M.2 Card - M.2 Card (internal)

Miscellaneous
   Included Accessories:  Low-profile bracket, 2 x M.2 mounting screws
   Features:  Support port multiplier
   Compliant Standards:  FCC, RoHS

Manufacturer Warranty
   Service & Support:  Limited warranty - 2 years

Dimensions & Weight
   Width:  0.8 in
   Depth:  7.1 in
   Height:  4.7 in
   Weight:  3.53 oz

Environmental Parameters
   Min Operating Temperature:  41 °F
   Max Operating Temperature:  122 °F
   Humidity Range Operating:  20 - 80% (non-condensing)
 
  • Manufactured by: StarTech.com
    Warranty provided by: StarTech.com
    UPC No: 065030863766
    Mfg Part No: PEXM2SAT3422
  • Box Size: ( Length:7, Width:9, Depth:2)
    Shipping Weight: 0.3500 pound(s)
    Dimensional Weight: 1pounds

    What is Dimensional weight?

    Click here for full warranty and support information
  • StarTech.com logos are registered trademarks of StarTech.com. All others trademarks and copyrights mentioned herein are the property of their respective owners.