The Cisco Catalyst 3650 series switch delivers converged wired and wireless access on a single platform, creating an uncompromised user experience in any workspace. The converged system provides a single platform for wired and wireless networkwide visibility for faster troubleshooting, advanced security and quality of service (QoS) control, maximum resiliency with fast stateful recovery, and scale with distributed wired and wireless data plane.
Specifications
General 
Device Type: Switch - 24 ports - L3 - managed - stackable

Enclosure Type: Desktop, rack-mountable 1U

Subtype: Gigabit Ethernet

Ports: 24 x 10/100/1000 (PoE+) + 4 x SFP

Power Over Ethernet (PoE): PoE+

PoE Budget: 390 W

Performance: Switching capacity: 88 Gbps ¦ Forwarding performance: 41.66 Mpps

Capacity: IPv4 routes: 24000 ¦ NetFlow entries: 24000 ¦ Virtual interfaces (VLANs): 4094 ¦ Switched virtual interfaces (SVIs): 1000

MAC Address Table Size: 32000 entries

Jumbo Frame Support: 9198 bytes

Routing Protocol: BGP-4, IS-IS, RIP-1, RIP-2, PIM-SM, static IP routing, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng

Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLI

Authentication Method: Kerberos, Secure Shell (SSH), RADIUS, TACACS+

Features: Full duplex capability, layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking

Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at

RAM: 4 GB

Flash Memory: 2 GB

Status Indicators: Port transmission speed, port duplex mode, system, active, status, PoE
Expansion / Connectivity 
Interfaces: 24 x 1000Base-T RJ-45 PoE+ - 30 W ¦ 1 x USB Type A ¦ 1 x serial (console) RJ-45 management ¦ 1 x management (Gigabit LAN) RJ-45 management ¦ 1 x management (mini-USB) Type B management ¦ 4 x 1000Base-X SFP uplink

Expansion Slots: 1 (total) / 1 (free) x Stacking Module slot
Power 
Power Device: Internal power supply - hot-plug

Installed Qty: 1 (installed) / 2 (max)

Power Redundancy: Optional

Power Redundancy Scheme: 1+1 (with optional power supply)

Power Provided: 640 Watt

Voltage Required: AC 120/230 V (50/60 Hz)
Miscellaneous 
Rack Mounting Kit: Included

MTBF: 528,280 hours

Compliant Standards: CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN55022 Class A, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, KCC, FCC Part 15 A, ISO 7779, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A
Software / System Requirements 
Software Included: Cisco IOS IP Services
Dimensions & Weight 
Width: 17.5 in

Depth: 17.6 in

Height: 1.7 in

Weight: 16.01 lbs
Manufacturer Warranty 
Service & Support: Limited warranty - replacement - lifetime - response time: next business day ¦ Technical support - phone consulting - 90 days
Environmental Parameters 
Min Operating Temperature: 23 °F

Max Operating Temperature: 113 °F

Humidity Range Operating: 5 - 96% (non-condensing)

Min Storage Temperature: -40 °F

Max Storage Temperature: 158 °F