C2G Pro HDMI Audio De-Embedder audio di Product Details
This device is ideal for projector installations where the projector does not provide an audio output and the system design calls for the use of an amplified audio reinforcement system. The Pro HDMI Audio De-Embedder provides the means to separate the audio from the HDMI signal and provide that audio to the amplifier. Setup is easy with minimal configuration time. Simply connect the HDMI and audio cables and power on the system.
The Pro HDMI Audio De-Embedder features two audio modes, A and B. When set to Mode A, the de-embedder will allow EDID signals to pass-through between source and display which will automatically set the audio output to the best common digital audio performance level. When set to Mode B, the de-embedder allows the digital audio output of the source to be set independently of the capabilities of the display. In both Modes, A and B, the digital audio must be output through the Toslink or Digital RCA port of the de-embedder. The 3.5 mm output of the de-embedder requires that the source be set to the PCM audio mode.
Type: Audio disembedder
Terminals: (1) x HDMI input - 19 pin HDMI Type A ¦ (1) x HDMI output - 19 pin HDMI Type A ¦ (1) x audio line-out - mini-phone stereo 3.5 mm ¦ (1) x SPDIF output - RCA ¦ (1) x SPDIF output - TOSLINK
Warranty: 1 year
Manufactured by: C2G
Warranty provided by: C2G
UPC No: 757120407195
Mfg Part No: 40719
( Length:0, Width:0, Depth:0)
Shipping Weight: 0.9860 pound(s)
Click here for full warranty and support information
- C2G logos are registered trademarks of C2G. All others trademarks and copyrights mentioned herein are the property of their respective owners.