StarTech.com HDMI over Cat5 / Cat6 Receiver for Product Details
Extend the HDMI signal from your ST424HDBT Matrix switch over Cat5 / Cat6 cable, with IR control - Works with any HDBaseT source - HDMI Extender / HDMI Cat5 Extender / HDMI CAT 5 Receiver for ST424HDBT - 4x4 Matrix Receiver - Switcher Cat5 Cat 6 Extender with IR Extension and Serial and IP Control - Use with the ST424HDBT to connect 4 different HDMI sources to 4 different displays, in different locations around a large building such as a shopping center, school, or hospital
This HDBaseT receiver works with the HDMI matrix switch to extend an HDMI audio/video source up to 230ft (70m) over Cat5e/6 cabling. One STHDBTRX receiver unit is required for each individual remote display.
Together with the ST424HDBT, the CAT5 HDMI receiver works to create a digital signage solution that eliminates the expense and hassle of running multiple devices with an HDMI matrix switch and extender in one clutter-free system. Because the signal is extended using standard Cat5e/6 Ethernet cables with RJ45 connectors, you can use your existing cabling infrastructure, without the additional cost of special cabling or connectors.
For remote source operation, the HDMI receiver can also extend an Infrared signal from a remote control to operate either the display or the video source from either side or system, using the included IR extender and receiver cables.
Manufactured by: StarTech.com
Warranty provided by: StarTech.com
UPC No: 065030855013
Mfg Part No: STHDBTRX
( Length:8, Width:6, Depth:3)
Shipping Weight: 1.1500 pound(s)
Click here for full warranty and support information
- StarTech.com logos are registered trademarks of StarTech.com. All others trademarks and copyrights mentioned herein are the property of their respective owners.