Aten VS92A

Aten VS92A 2-Port 250 MHz Video Splitter

Item#:  YYD2-VS92A  | Model#: VS92A

Currently Out Of Stock!

You May Consider This Alternative

Aten VS92A Product Details

Video Splitter For Use With Analog Displays
The Video Separator is a signal booster and splitter that is used to take video input from a single source and direct it to two video outputs for monitors using analog signals. The signal boost obtained by using the VS-102 allows you to not only split the signal but to extend the distance so that you can send the signal to about 210 feet. This is no mean feat, your average VGA card, over a standard VGA cable, send a clear VGA signal approximately 25 feet. This makes public broadcasts from a single computer very feasible. If you want to display the same information on many monitors at once, such as in a classroom environment, or at a demonstration, this product performs incredibly well.

Bandwidth is the term that is used to describe the signal capacity of these units. In general, bandwidth is directly proportional to the amount of data transmitted per unit of time. Specifically, in analog signals, bandwidth is the difference between the highest-frequency and the lowest frequency components of a givin signal. For example a voice telephone signal has a bandwidth of 3000 Hz (or 3000 cycles per second), where an analog TV signal has a bandwidth of approximately 6MHz (or 6 million cycles per second) which is approximately 2000 times greater than a simple voice phone call. These units have a bandwidth of 250MHz (which is 250 million cycles per second) and that is almost 42 times greater than a simple TV signal. This huge bandwidth allows for the transmission of large amounts of information at a very high rate of speed, and thus you can use the very high resolution setting of 1600 x 1200 in 24 or 32 bit true color mode at a refresh rate of 70Hz.


  • Case:
    - Width 13.75 in. (34.925 cm.)
    - Height 13.5 in. (34.29 cm.)
    - Length 20 in. (50.8 cm.)
    - Case Qty. 3
  • Package Dimensions:
    - Depth 5 in. (12.7 cm.)
    - Height 13 in (33.02 cm.)
    - Width 24.75 in. (62.87 cm.)
  • LEDs: Power On
  • Housing: Case Metal
  • Weight:
    - Case Wt. 36 lbs. (16.2 kg.)
    - Package Wt. 12.9 lbs. (5.81 kg.)
  • Dimensions:
    - Width 2.95 in. (7.5 cm.)
    - Length 5.12 in. (13 cm.)
    - Height 0.79 in. (2 cm.)
  • Connectors (Output): 2 x 15 pin HDB Female
  • VGA Bandwidth (-3db): 250 MHz
  • Signal Type: VGA; SVGA; MultiSync
  • Connectors (Input): 15 pin HDB Male
  • Power Consumption: DC 9V 0.82 W (Max)
  • Cable Distance: 210
  • Video Resolution: 1920 x 1440 @ 60 Hz


  • One video input with two video outputs
  • High 250 MHz video bandwidth
  • Transmission distance of up to 210 feet
  • Suitable for SVGA, VGA, and Multisync monitors
  • Daisy-Chain multiple units together for even more outputs
  • Ideal for public broadcasting; remote monitoring; classroom and training facilities

Minimum System Requirements

  • Macintosh Users - All MACs with analog VGA support
  • PC Users - All PCs with analog VGA support
  • VGA, SVGA, Multisynce Compatible
  • Supports DDC, DDC2, DDC2B at Port

What's Included

  • Video Splitter
  • DC 9V Power Adapter
  • User Manual
  • Registration / Warranty Card
  • Manufactured by: Aten Technology
    Warranty provided by: Aten Technology
    UPC No: 672792000249
    Mfg Part No: VS92A
  • Box Size: ( Length:7, Width:10, Depth:3)
    Shipping Weight: 1.7000 pound(s)
    Click here for full warranty and support information
  • Aten Technology logos are registered trademarks of Aten Technology. All others trademarks and copyrights mentioned herein are the property of their respective owners.