Tripp Lite PDUMH15AT Power Distribution Unit (PDU)
Price: $42999
Tripp Lite PDUMH15AT Power Distribution Unit (PDU)
  1. Limit 5 per customer ADD TO CART
  2. Save to wishlist

Tripp Lite PDUMH15AT Power Distribution Unit (PDU) - Metered, 8 NEMA 5-15R, 15 Amps, Rackmount, ATS

Item#:  T105-1236 CA  | Model#: PDUMH15ATCA
In Stock, usually ships within 24 hours (Details)

Tripp Lite PDUMH15AT Power Distribution Unit (PDU) Product Details

Tripp Lite PDUMH15AT Power Distribution Unit (PDU)
Tripp Lite's 120V 15A metered PDU system with Automatic Transfer Switching (ATS) is an 8 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned on at 250 milliscond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Supports 1U rackmount installation in a 2 or 4 post rack. Included are 8 NEMA 5-15R outlets, and two 12 ft. 5-15P input power cord.

Optional integrated ATS is available for use when two separately derived input power sources are available. The attached power cord serves as the primary AC input cable, while the included detachable power cord serves as the optional-use secondary AC input connection. The PDU system passes the primary input power through to connected equipment whenever line voltage and frequency levels are normal. If the primary input source goes outside of these tolerances or fails altogether, the ATS will automatically switch all PDU output to the secondary line sourced input power (when available) to maintain continuous operation of connected loads without reboots or service interruptions. Once the primary power source is restored, the PDU will automatically switch back to primary sourced input power. The dual input cabling can be configured for UPS maintenance bypass of standard UPS systems or to create a redundant dual-UPS power source for a critical, single-corded network device.

A Closer Look


  • 120V 15A metered PDU system with Automatic Transfer Switch (ATS)
  • Dual input cords, one attached (primary) and one optional-use detachable cord (secondary)
  • Included cordsets support 5-15P plug-in connection
  • Front panel digital ammeter displays power consumption in amps
  • 8 built-in NEMA 5-15R output receptacles
  • Optional ATS function enables setup for hot-swappable UPS maintenance bypass, dual UPS protection or dual AC input redundancy for critical single-corded network hardware
  • Small 1U rackmount format installs in only one rack space with a maximum installed depth of 14.5 inches
  • deal for configurations requiring a simple PDU that displays power consumption in amps
  • Optional-use ATS function makes this system ideal for adding redundancy to single corded devices
  • ATS function adds hot-swap and maintenance bypass function to standard UPS configurations
  • 15A 120V capacity with 8 NEMA 5-15R outlets
  • Connects to NEMA 5-15R receptacles
  • Integrated Automatic Transfer Switch (ATS) allows PDU to operate from secondary input source when primary input fails
  • Sequential outlet power-on prevents inrush-related equipment interaction on startup
  • Manufactured by: Tripp Lite
    Warranty provided by: Tripp Lite
    UPC No: 037332126658
    Mfg Part No: PDUMH15ATCA
  • Box Size: ( Length:23, Width:24, Depth:6)
    Shipping Weight: 15.2000 pound(s)
    Click here for full warranty and support information
  • Tripp Lite logos are registered trademarks of Tripp Lite. All others trademarks and copyrights mentioned herein are the property of their respective owners.