Aten 30-Foot Console Extension Cable Product Details
MasterView Console Extension Cable
The cables that you use when connecting your computer to our MasterView KVM switches play a very important role in the quality of the communication between the PCs and the MasterView unit. These custom made cables are designed to provide the highest signal capacity along with the lowest signal loss. What this means, to you as the consumer, is that you will receive the highest quality video output even in the higher SuperVGA video modes.
An average cable has one layer of shielding, a thin layer of mylar foil that has been cut into a very long and narrow, approximately one half of an inch wide, strip that is wound in a spiral pattern around the wires, also called leads, in order to reduce the cost of the cable. There are a few problems with this method of shielding a signal bearing cables, first and foremost among them is the fact that this wrapped foil method can "leak" RF (radio frequency) interference. Additionally the manufacturers of your average cables use very small wires to carry the information; generally they use 28 or 26 AWG wires (in AWG the higher the number for the gauge the smaller the actual size of the wire) to carry their information. This is another concession to reducing the manufacturing costs of the cables.
Some of your other "Premium" cables are made in the same way and with the same materials as your average cable. The manufacturers put fancy connectors on the cable then stamp the word "Premium" on the packaging and then charge you more for the cable.
Aten has invested millions of dollars into cable manufacturing to ensure the highest quality cables at the lowest possible cost. Aten's cables are double shielded; beneath the PVC outer insulator you will find a copper braid RF shield, then beneath that you will find the mylar foil shield. Unlike competitors, instead of spiral wrapping the mylar foil shield, Aten takes a single piece and enclose the signal carrying wires in a one-piece envelope. All cables are manufactured with low resistance and low capacitance 24 AWG wires to ensure the best video performance. Another important difference between these cables and those of the competitors is that Aten uses coaxial wires to carry the red, green, and blue video signals. Aten's competitors just throw the signal and its ground on two separate wires. By using coaxial wires Aten reduces the possibilities of interference even farther.
- Cables are double shielded to prevent RF Interference even in the most electronically noisy environments.
- Cables use low resistance and low capacitance 24 gauge wire to ensure peak performance.
- All cables comply with their corresponding specifications.
Manufactured by: Aten Technology
Warranty provided by: Aten Technology
UPC No: 672792105197
Mfg Part No: 2L1010P
( Length:9, Width:8, Depth:3)
Shipping Weight: 3.8200 pound(s)
Click here for full warranty and support information
- Aten Technology logos are registered trademarks of Aten Technology. All others trademarks and copyrights mentioned herein are the property of their respective owners.