Tripp Lite PDUMH30ATNET - power distribution u
Price: $1,20799
ADD TO CART
Tripp Lite PDUMH30ATNET - power distribution u
  1. Limit 1 per customer ADD TO CART
  2. Save to wishlist

Tripp Lite PDUMH30ATNET - Power distribution unit ( rack-mountable ) - AC 100/120/127 V - Ethernet - 25 output connector(s) - 2U

Item#:  YYT2-1661A8  | Model#: PDUMH30ATNET
Price:
$1,207.99
Shipping:
In Stock, usually ships within 24 hours (Details)

Tripp Lite PDUMH30ATNET - power distribution u Product Details

PDUMH30ATNET 2U horizontal rackmount Auto Transfer Switch / ATS offers 30A 120V multi-outlet power distribution with dual input connections, individually switched outlets, built-in network interface and digital current metering. Includes separate L5-30P primary and secondary input cords and 25 switched output receptacles. Built-in network interface enables remote SNMP/Web monitoring and control. Remotely displays status of input power, load level and outlet power status via secure network or web browser interface. Supports optional environmental and contact-closure sensor options. Offers programmable or real-time individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Tripp Lite Automatic Transfer Switch / ATS systems enable advanced redundant power configurations for network equipment with a single AC input connection. Separate primary and secondary cables support connection to any two compatible power sources. ATS systems normally maintain continuous output to all outlets as derived from the primary input. If the primary power source becomes unstable or fails altogether in relation to the secondary input, the ATS will automatically switch over to the secondary power source until the primary input is restored and stable. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle to offer support for a variety of unique redundant power applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave online UPS. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LEDs display primary and secondary power availability.

Specifications

General
   Device Type:  Power distribution unit - rack-mountable
   Height (Rack Units):  2U

Power Device
   Input Voltage:  AC 100/120/127 V
   Frequency Required:  60 Hz
   Input Connector(s):  2 x power NEMA L5-30
   Power Output Connectors Details:  24 x power NEMA 5-15/20 ¦ 1 x power NEMA L5-30
   Output Voltage:  AC 120 V ( 60 Hz )
   Max Electric Current:  30 A

Networking
   Remote Management Interface:  Ethernet
   Remote Management Protocol:  SNMP, HTTP

Expansion / Connectivity
   Interfaces:  1 x management (Ethernet)

Miscellaneous
   Cables Included:  2 x power cable - 10 ft
   Rack Mounting Kit:  Included
   Features:  LED display, current meter, Automatic Transfer Switch (ATS)
   Compliant Standards:  NOM, RoHS, UL 60950-1

Manufacturer Warranty
   Service & Support:  2 years warranty
   Service & Support Details:  Limited warranty - 2 years

Environmental Parameters
   Humidity Range Operating:  0 - 95% (non-condensing)

Dimensions & Weight
   Width:  17.5 in
   Depth:  12.5 in
   Height:  3.5 in
   Weight:  13.9 lbs

Dimensions & Weight (Shipping)
   Shipping Width:  20.5 in
   Shipping Depth:  17 in
   Shipping Height:  8 in
   Shipping Weight:  13.9 lbs
 
  • Manufactured by: Tripp Lite
    Warranty provided by: Tripp Lite
    UPC No: 037332157294
    Mfg Part No: PDUMH30ATNET
  • Box Size: ( Length:21, Width:18, Depth:8)
    Shipping Weight: 19.4000 pound(s)
    Click here for full warranty and support information
  • Tripp Lite logos are registered trademarks of Tripp Lite. All others trademarks and copyrights mentioned herein are the property of their respective owners.