APC Switched Rack PDU 2G - power distribution unit

APC Switched Rack PDU 2G - Power distribution unit ( rack-mountable ) - AC 100/120 V - 2880 VA - Ethernet, RS-232, USB - input: NEMA L5-30P - 24 output connector(s) ( NEMA 5-20R ) - 0U - black - for P

Item#:  YYD2-AP8932CA  | Model#: AP8932

Currently Out Of Stock!

You May Consider This Alternative

APC Switched Rack PDU 2G - power distribution unit Product Details

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Specifications

General
   Device Type:  Power distribution unit - rack-mountable
   Height (Rack Units):  0U
   Color:  Black

Power Device
   Input Voltage:  AC 100/120 V
   Frequency Required:  50/60 Hz
   Input Connectors:  1 x power NEMA L5-30P
   Power Output Connectors Details:  24 x power NEMA 5-20R
   Output Voltage:  AC 100/120 V
   Max Electric Current:  30 A
   Power Capacity:  2880 VA

Networking
   Remote Management Interface:  Ethernet, RS-232, USB
   Remote Management Protocol:  SNMP, Telnet, HTTP

Expansion / Connectivity
   Interfaces:  1 x management (Ethernet) - RJ-45 ¦ 1 x management (USB) - 4 pin USB Type A ¦ 1 x management (RS-232)

Miscellaneous
   Cables Included:  Power cable 10 ft ¦ Serial cable - external
   Rack Mounting Kit:  Included
   Features:  LCD display, LED indicators, overload protection, short-circuit protection, firmware upgradable
   Compliant Standards:  UL, cUL, ICES-003, RoHS, UL 60950-1, FCC Part 15 A, PSE Mark, REACH

Manufacturer Warranty
   Service & Support:  Limited warranty - 2 years

Environmental Parameters
   Min Operating Temperature:  23 °F
   Max Operating Temperature:  113 °F
   Humidity Range Operating:  5 - 95%

Dimensions & Weight
   Width:  2.2 in
   Depth:  1.8 in
   Height:  70.5 in
   Weight:  17.31 lbs

Dimensions & Weight (Shipping)
   Shipping Width:  6.5 in
   Shipping Depth:  4.3 in
   Shipping Height:  79 in
   Shipping Weight:  21.3 lbs

Compatibility Information
   Designed For:  P/N: AR3100
 
  • Manufactured by: APC
    Warranty provided by: APC
    UPC No: 731304307532
    Mfg Part No: AP8932
  • Box Size: ( Length:79, Width:7, Depth:5)
    Shipping Weight: 20.2400 pound(s)
    Click here for full warranty and support information
  • APC logos are registered trademarks of APC. All others trademarks and copyrights mentioned herein are the property of their respective owners.