StarTech.com 3PT M.2 SSD Adapter Card - 1x PCIe Product Details
If you need a simple and discreet way to expand your computer's storage, then this card can help. The card provides a platform for adding up to three M.2 SSDs to virtually any computer that has a PCIe slot. It supports common M.2 SATA SSDs, as well as newer high-performance M.2 PCIe drives. Now, you have a simple and effective way to expand the storage of your computer, regardless of the M.2 drive types you are using.
When you couple this card with a PCI Express based M.2 drive, you can give your computer's performance a noticeable speed boost. With support for PCI Express 3.0 (up to approximately 40Gbps), you can install the latest high-performance M.2 PCIe SSDs inside your computer. With faster performance, you can get more work done in less time.
Due to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has failed, but its M.2 drive is still functional, then this card can help with data recovery. Once the M.2 drive is installed and the data recovery is complete, you can continue to use the drive for storage and backup purposes.
This M.2 card lets you take advantage of the size and performance benefits of NGFF M.2 SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so you can install them in small form-factor PCs and servers, or in tighter areas within your computer case.
You can rest assured that your M.2 SSDs are compatible with the adapter card. It supports the most common drive sizes, including, 2280, 2260, 2242 and 2230.
Device Type: Interface adapter - internal
Hard Drive Form Factor Compatibility: M.2
Host Bus: PCIe 3.0
Interface: M.2 Card / SATA 6Gb/s
Data Transfer Rate: 6 Gbit/s
Supported Devices: Solid state drive
Expansion / Connectivity
Interfaces: 3 x M.2 Card - M.2 Card
Connections: 2 x SATA 6Gb/s - 7 pin Serial ATA
Compatible Bay: 1 x internal
Included Accessories: Low-profile bracket, screwdriver, M.2 screws
Features: Supports ATA/ATAPI packet command set
MTBF: 50,000 hours
Compliant Standards: FCC, RoHS, RCM
Service & Support: Limited warranty - 2 years
Dimensions & Weight
Width: 0.8 in
Depth: 3.9 in
Height: 4.7 in
Weight: 3.53 oz
Min Operating Temperature: 41 °F
Max Operating Temperature: 122 °F
Humidity Range Operating: 20 - 80% (non-condensing)
Manufactured by: StarTech.com
Warranty provided by: StarTech.com
UPC No: 065030865708
Mfg Part No: PEXM2SAT32N1
( Length:7, Width:6, Depth:1)
Shipping Weight: 0.2500 pound(s)
Dimensional Weight: 1pounds
What is Dimensional weight?
Click here for full warranty and support information
- StarTech.com logos are registered trademarks of StarTech.com. All others trademarks and copyrights mentioned herein are the property of their respective owners.