C2G 50W Audio Amplifier (Plenum Rated) Product Details
Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.
After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode instantly when a signal is received.
The accessory power output provides 12 Volts DC and 500 mAmps. This makes the amplifier the perfect match for a controller such as the TruLink A/V Controller
This amplifier accepts a 3.5mm and RCA Stereo Audio input as well as a 3.5mm Microphone input. The mixing function ensures that audio from all three inputs are mixed and sent to the speaker outputs.
This amplifier is designed to accept either RS232 control or control signals from an industry standard volume control.
The PA sensor will automatically mute the audio inputs of the amplifier allowing the public address to be heard.
Product Type: Amplifier
Enclosure Material: Metal
Audio Specifications: Amplifier - Response Bandwidth - 20 - 20000 Hz - SNR - 80 dB
Output Channel Qty: 2 channels
Output Power (per channel): 15 Watt
Output Power / Total: 50 Watt
Input Impedance: 18 kOhm
Input Sensitivity: 316 mV
Amplifier Output Details: 50 Watt - 4 Ohm - at 1 kHz - 1 channels (bridged) ¦ 25 Watt - 4 Ohm - at 1 kHz - 2 channels (main) ¦ 15 Watt - 8 Ohm - at 1 kHz - 2 channels (main) ¦ 1 Watt - at 1 kHz - THD 0.05%
Features: Auto power save, 3-channel mixer, bridged output capability, D-CLASS amplifier
Connectors: Audio input (mini-phone stereo 3.5 mm) ¦ Audio input (RCA x 2) ¦ Microphone (mini-phone 3.5 mm) ¦ 2 x speakers output (Phoenix-type) ¦ Telephone / paging input (Phoenix-type) ¦ Remote control input (Phoenix-type) ¦ Serial (Phoenix-type) ¦ DC power input ¦ DC power output
Included Accessories: AC power adapter
Voltage Required: AC 120/230 V / DC 12 V
Service & Support: Limited warranty - 1 year
Dimensions & Weight
Width: 4.3 in
Depth: 4.5 in
Height: 1.5 in
Weight: 2.65 lbs
Manufactured by: C2G
Warranty provided by: C2G
UPC No: 757120408802
Mfg Part No: 40880
( Length:0, Width:0, Depth:0)
Shipping Weight: 2.7000 pound(s)
Click here for full warranty and support information
- C2G logos are registered trademarks of C2G. All others trademarks and copyrights mentioned herein are the property of their respective owners.